In IVF and embryology, precision and reliability aren’t optional — they’re essential. From handling delicate oocytes to monitoring embryo development, maintaining a stable physiological temperature is foundational to lab success. That’s why high-performance stage warmers like the TPI Unix have become a trusted tool in modern embryology workstations.
If you’ve been considering upgrading your IVF workstation or adding a temperature-controlled platform to your stereo microscope, this guide is designed to give you a visual, practical understanding of how the TPI Unix works before you purchase. We’ll walk through unboxing, setup, compatibility, and ease of use, and point you to the purchase link when you’re ready.
📹 First — watch the full hands-on walkthrough here:
👉 TPI Unix Microscope Stage Warmer Setup & Demo
https://www.youtube.com/watch?v=U89YZiXANiI
What Is the TPI Unix?
The TPI Unix is a universal thermal stage plate engineered specifically for IVF and embryology workstations using stereo microscopes. It provides a stable, uniform temperature surface directly beneath the culture dish, helping protect sensitive oocytes and embryos from thermal shock during handling and observation.
It is ideally suited for:
-
Embryo and oocyte handling
-
ICSI preparation workflows
-
Embryo assessment and grading
-
Dish manipulation at the stereo microscope workstation
Unlike upright clinical compound microscopes, IVF labs rely on stereo microscopes for micromanipulation and handling — and the Unix is designed precisely for this environment.
Important Compatibility Note
The TPI Unix is not designed for upright clinical compound microscopes (such as Olympus BX or Nikon Eclipse laboratory scopes).
Instead, it is built to integrate with clinical stereo microscopes commonly used in IVF labs, including:
These systems are standard in embryology workstations, where open access to the dish and a wide working distance are required for manipulation. The Unix fits seamlessly into this workflow.
Out of the Box — What to Expect
Inside the box you’ll find:
-
The TPI Unix thermal stage plate
-
Four adjustable leveling pillars
-
Power supply and cables
-
A detailed instruction manual
Everything is packaged for fast deployment in a working IVF lab environment.
How to Set Up the TPI Unix (Step-by-Step)
One of the Unix’s biggest strengths is how quickly it can be integrated into an embryology workstation.
1. Install the Leveling Pillars
Before placing the unit on your microscope:
-
Screw the four leveling pillars into the threaded holes on the bottom of the Unix platform.
-
These pillars allow precise height and level adjustment on the microscope base.
This ensures:
-
Proper dish positioning
-
Smooth stage movement
-
Accurate focus across the entire field of view
Once installed, the pillars typically remain in place permanently.
2. Position the Unix on the Stereo Microscope Base
After attaching the pillars:
-
Place the Unix on the base of your stereo microscope workstation (Olympus SZX, Nikon SMZ, and similar IVF platforms).
-
Adjust the pillars so the platform sits flat and stable.
Its low-profile design preserves comfortable hand positioning during micromanipulation.
3. Connect Power and Set Temperature
-
Plug in the power adapter at the rear of the unit.
-
Use the front control interface to set your target temperature.
The Unix quickly reaches a stable operating temperature and maintains it consistently throughout procedures.
4. Place the Culture Dish
Once warmed:
-
Position your culture dish directly on the heated plate.
-
Heat is applied evenly across the entire surface, supporting stable embryo handling conditions.
Manual & Warranty — Built for Clinical Confidence
The included manual provides:
-
Setup diagrams
-
Temperature guidelines
-
Safety and maintenance instructions
The TPI Unix is backed by a manufacturer’s warranty, reinforcing its reliability in regulated IVF laboratory environments.
Why IVF Labs Trust the TPI Unix
The Unix is purpose-built for embryology workstations:
✔ Designed for stereo microscopes used in IVF
✔ Fast, intuitive installation
✔ Adjustable leveling pillars for precise positioning
✔ Uniform temperature at the dish level
✔ Clean integration into micromanipulation workstations
✔ Backed by documentation and warranty
Seeing the system in use helps visualize its real-world workflow:
📹 https://www.youtube.com/watch?v=U89YZiXANiI
🛒 Ready to Add One to Your IVF Workstation?
View full specifications and order here:
👉 TPI Unix Microscope Stage Warmer — Universal Thermal Plate for IVF
https://microscopemarketplace.com/products/tokai-hit-tpi-unix-microscope-stage-warmer-universal-thermal-plate-for-ivf
Final Thought
For IVF clinics, protecting embryos begins with controlling their environment at every step. The TPI Unix Stage Warmer provides a simple, reliable way to maintain thermal stability during the most delicate handling procedures.
With its stereo-microscope compatibility, fast setup, adjustable leveling pillars, and proven reliability, it is a smart upgrade for any modern embryology workstation.
If you’d like help confirming compatibility with your specific Olympus SZX or Nikon SMZ system, the team at Munday Scientific & Microscope Marketplace is always here to help.