When working with fluorescence microscopy, having the right tools and knowing how to set them up is essential for obtaining clear, high-quality images. For Olympus microscopes such as the IX51 or IX71, you can install or replace the fluorescence turret and illuminator to improve your system's performance.

In this blog post, we’ll guide you through the process of installing and using these components, including tips on changing fluorescence filters. Additionally, we’ve provided helpful video guides and links to purchase the necessary parts.

What You’ll Need:

• Olympus IX2-RFA Fluorescence Illuminator (5-UR401) – Buy the Illuminator

• Olympus IX2-RFAC 6-Position Fluorescence Filter Cube Turret – Buy the Filter Turret

• Olympus IX2-RFACA Motorized Filter Turret (for motorized systems) – Buy the Motorized Turret

Step-by-Step Guide for Installing the Fluorescence Turret and Illuminator

1. Power Off the Microscope Before beginning any installation or removal, ensure your Olympus IX51 or IX71 microscope is powered off and unplugged to avoid any accidents.

2. Remove the Existing Turret (if applicable) If you're replacing an existing turret, carefully remove it from under the microscope’s revolving nosepiece. The video linked below shows how to remove the turret on a compound microscope, which follows the same concept for the IX51 and IX71 models.

   • Video on Removing the Fluorescence Turret: Remove the Fluorescence Turret and Illuminator

3. Install the Fluorescence Illuminator The IX2-RFA Fluorescence Illuminator (5-UR401) is crucial for providing the appropriate light source for fluorescence applications. Here’s how to install it:

   • Step 1: Position the illuminator near the microscope and connect it to the microscope’s light path.

   • Step 2: Attach the illuminator to the microscope using the mounting brackets provided, ensuring it is securely fixed in place.

   • Step 3: Plug the illuminator into a power source and ensure it is powered on.

   • Buy the Fluorescence Illuminator: Olympus IX2-RFA Fluorescence Illuminator (5-UR401)

4. Install the Fluorescence Filter Turret The IX2-RFAC 6-Position Fluorescence Filter Cube Turret allows you to quickly switch between different fluorescence filters for various applications.

   • Step 1: Remove any existing filter turret from the microscope’s nosepiece, if applicable.

   • Step 2: Insert the new IX2-RFAC 6-Position Filter Cube Turret into the nosepiece, ensuring it is aligned properly.

   • Step 3: Secure the turret by tightening the clamping knob. Make sure it’s firmly in place to avoid any issues during use.

   • Buy the Filter Turret: Olympus IX2-RFAC 6-Position Fluorescence Filter Cube Turret

   If you have a motorized turret, follow the same steps as above but ensure that the motorized turret is connected to the appropriate power source and control system to enable automated filter switching.

   • Buy the Motorized Turret: Olympus IX2-RFACA Motorized Filter Turret

5. Change Fluorescence Filters (if necessary) If you need to change the fluorescence filters in the turret, follow these steps:

   • Step 1: Remove the filter cube by opening the turret housing.

   • Step 2: Carefully remove the existing filter from the cube.

   • Step 3: Insert the new fluorescence filter into the cube, ensuring it is positioned correctly.

   • Step 4: Reassemble the turret and insert it back into the microscope’s revolving nosepiece.

6. Test the Setup After installing the turret and illuminator, test the setup to ensure everything is working correctly:

   • Turn on the illuminator and select the appropriate filter on the turret.

   • Ensure the fluorescence light source is stable and provides the correct wavelength for your specimen.

   • If using a motorized turret, test the automated filter change functionality.

   Video Guide for Installation: Installing the Fluorescence Turret and Illuminator

Need Assistance? We’re Here to Help!

At Munday Scientific, we pride ourselves on offering top-quality microscopes and equipment, along with exceptional customer support. If you encounter any issues during the installation process or have any questions about your Olympus IX51 or IX71 microscope setup, don’t hesitate to reach out to us.

• Email: info@mundaymicroscope.com

• Phone: 919-775-5596

Conclusion

Installing the fluorescence turret and illuminator on your Olympus IX51 or IX71 microscope can significantly enhance your ability to perform fluorescence microscopy. With the right tools, such as the IX2-RFA Fluorescence Illuminator and the IX2-RFAC Fluorescence Filter Cube Turret, you’ll be able to observe and analyze a variety of specimens with high precision. If you need any assistance, remember that Munday Scientific is always here to help!

For more information on these products, check out the links to purchase below:

• Olympus IX2-RFA Fluorescence Illuminator: Buy Now

• Olympus IX2-RFAC 6-Position Fluorescence Filter Cube Turret: Buy Now

• Olympus IX2-RFACA Motorized Filter Turret: Buy Now