Memmert Peltier Cooled Storage Incubators IPP30 115V (32L)

OVERVIEW

IPP30 Plus Memmert Peltier-cooled incubators guarantee the perfect climate and temperature for laboratory applications.

FEATURES

• STAINLESS STEEL
• ATMOCONTROL
• 3 YEAR WARRANTY
• TWINDISPLAY

Temperature Specs:

• Working temperature range without humidity: 
  From 0°C (at least 20°C below ambient) to 70°C
• Setting accuracy temperature: 
  0.1°C
• Temperature:
  2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value

Heating Concept:

• Peltier:
  Energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)
• Peltier:
  Heating and cooling performance distribution by individual control of the Peltier elements in the upper and lower row

Control Technology:

• Adjustable parameters: 
  Temperature (Celcius or Fahrenheit), program time, time zones, daylight savings time
• Function SetpointWAIT: 
  The process time does not start until the set temperature is reached
• Language setting:
  German/English/Spanish/French
• Calibration:
  Three freely selectable temperature values

Safety:

• Alarm: 
  Audible and visual
• Temperature control: 
  Over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB protection class 2 selection on display
• AutoSAFETY:
  additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
• Autodiagnostic system:
  For fault analysis

Electrical data

115 Volts

• (+/- 10%)
• 50/60 Hz / approx. 1.4 amps

Stainless Steel Interior:

• Volume:
  Approx. 1.1 ft³/32 L
• Dimensions W x H x D in mm
  w_(A) x h_(B) x d_(C): 400 x 320 x 250 mm
• Number of Stainless Steel Grids: 
  1
• Max. number of grids: 
  3
• Max. loading per grid: 
  20 kgs / 44 lbs.
• Max. loading of chamber: 
  60 kgs / 132 lbs.

Textured Stainless Steel Casing

• Dimensions: 
  w x h x d : 585 x 707 x 524 mm

Stainless Steel

For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).

Brochure